Curing your concrete properly enhances its strength, durability, water tightness, and resistance over time. Spray the slab with water 5-10 times a day, or as often as possible, during the first 7 days following installation. The curing process begins shortly after the concrete is poured. Visit: Basements Capping Beams Service Page Read MoreWhen should you spray concrete with water?
The most popular method of curing concrete nowadays is to spray a liquid membrane-forming chemical known as 'cure.' The cure is sprayed across the slab's surface, creating a layer that minimizes water evaporation from the surface. Visit: Basements Capping Beams Service Page Read MoreWhat do they spray on cement?
Spray On Concrete Resurfacing is a permanent, slip-resistant coating that is at least twice as hard as concrete when sprayed by a competent applicator. Spray On Concrete Resurfacing will not only look wonderful, but will also add value to your house, converting your restoration into an investment. Check Basements Capping Beams Service Info Read MoreIs spray on concrete good?
On a concrete surface, scaling is described as a general loss of surface mortar or mortar surrounding the coarse aggregate particles. Check Basements Capping Beams Service Info Read MoreWhat is concrete scaling?
Shotcrete is a method of putting concrete or mortar to a prepared surface by pneumatically projecting or spraying it with a high-velocity nozzle. Shotcrete can alternatively be referred to as Gunite or sprayed concrete. Steel, rods, steel mesh, or fibers are commonly used to strengthen it. Check Basements Capping Beams Service Info Read MoreWhat is shotcreting in civil engineering?
Cement and damp aggregate are combined in this procedure before being deposited in a mechanism that meters the mixture into a stream of compressed air. The compressed air transports the material through a delivery pipe to the nozzle, where water is supplied under pressure through a perforated ring. Check Basements Capping Beams Service Info Read MoreWhat is shotcreting explain dry mix process of shotcreting?
A building material consisting of a mixture of cement, sand, and water that is sprayed onto a mold. Check Pool Shotcrete Service Info Read MoreWhat is the meaning gunite?
Shotcrete is a wet or dry mix concrete that is pneumatically propelled at high velocity through a hose and nozzle, eliminating the need for traditional shaping. CIP concrete has certain benefits than shotcrete, notably in terms of reducing water ingress: superior structure to reduce voids. Visit: Pool Shotcrete Service Page Read MoreWhat is the difference between concrete and shotcrete?
Despite the fact that several dry-mix processes have functioned well when subjected to moderate freezing and thawing, dry-mix shotcrete is more susceptible to cold and thawing difficulties than wet-mix shotcrete. Visit: Pool Shotcrete Service Page. This is because it is difficult to enter the air and create a suitable air-void system in dry-mix shotcrete. Read MoreWhat are the disadvantages of shotcrete?
Shotcrete is normally made up of one part cement and four parts sand by weight, with around 7% water by mass of dry materials. Coarse aggregate and admixtures may also be included. Dry mix shotcrete is created by premixing dry components with water at the nozzle. Visit: Pool Shotcrete Service Page Read MoreWhat is shotcrete mix?